Ruthenium-catalyzed cyclization of 3-en-1-ynyl imines with nucleophiles via tandem 5-exo-dig cyclization and nucleophilic addition

Treatment of 3-en-1-ynyl imines with TpRuPPh₃(CH₃CN)₂PF₆ catalyst (1 mol %) in DCE (50 °C, 6 h) effected catalytic cyclization with suitable nucleophiles and gave functionalized pyrroles in good yields. The reaction mechanism is proposed to proceed via (2-pyrrolyl)carbenoid intermediates derived from 5-exo-dig cyclization. This catalytic reaction works well with various nucleophiles, including water, alcohols and anilines.     

Poly[(μ2‐1,3‐di‐4‐pyridylpropane‐κ2N:N′)(μ3‐glutarato‐κ3O:O′:O′′)dizinc(II)]

The title compound, [Zn₂(C₅H₆O₄)₂(C₁₃H₁₄N₂)]_n or [Zn₂(glu)₂(bpp)]_n, is a novel zinc polymer based on mixed flexible glutarate (glu) and 1,3‐di‐4‐pyridylpropane (bpp) ligands. The Zn^II center has a distorted tetra­hedral geometry and the central atom of the bpp ligand is located at a special site with a C₂ axis passing through it. A layer is formed by Zn–glu bonding. Such layers are pillared by bpp ligands, forming a three‐dimensional framework with large channels. The inverted inter­penetration of two three‐dimensional frameworks completes the mol­ecular structure.     

Molecular structure of 2,2,4,4,6,6-hexamethyl-1,3,5-trimethylenecyclohexane as determined by gas-phase electron diffraction

The molecular structure of 2,2,4,4,6,6-hexamethyl-1,3,5-trimethylenecyclohexane has been determined in the gas phase at a nozzle tip temperature of 340 K. The electron diffraction data were found to be consistent with a model where the cyclohexane ring adopts a distorted twist-boat conformation. The averaged geometrical parameters (r(g) and 90 degree angle (alpha)) obtained from least squares analysis are r(C=C) = 1.346(4) A, r(C-C)(ring) = 1.537(1) A, r(C-C)(Me) = 1.543(1) A, 90 degree angle C(6)C(1)C(2) = 117.5(11) degrees, 90 degree angle C(1)C(2)C(3) = 113.1(12) degrees, and 90 degree angle MeCMe = 108.2(13) degrees. The experimental results are consistent with the results from HF/6-311G(d) and MP2/6-311G(d) calculations where the distorted twist-boat form is found to be lower in energy than the chair form by 9.85 and 10.7 kcal/mol, respectively.     

高效液相色谱-串联质谱法测定蜂蜜中9种农药残留

建立了同时测定蜂蜜中9种苯并咪唑类和新烟碱类农药的全自动固相萃取-高效液相色谱-串联质谱检测方法。蜂蜜样品用磷酸盐缓冲液（pH=7.8）溶解，超声提取，经亲水亲脂平衡（hydrophilic-lipophilic balance，HLB）固相萃取小柱净化，氮吹浓缩，定容，过滤膜后进行高效液相色谱-串联质谱分析，采用多反应监测（MRM）模式测定，以内标法定量。结果表明，在0.002~0.05 mg/L范围内9种农药呈现出较好的线性关系（相关系数r² ≥ 0.99），检出限和定量限分别为0.1~1.0 μg/kg和0.3~2.0 μg/kg。对阴性蜂蜜，在5.0、10.0、20.0 μg/kg 3个水平下分别进行加标回收试验，测出9种农药的平均回收率在78.2%~101.2%之间，相对标准偏差为1.3%~14.3%（n=6）。该方法可适用于大批量蜂蜜样品的快速准确测定。     

胶体法制备Mn2+掺杂Ⅱ-Ⅵ族稀磁性半导体纳米晶体材料的研究进展

近年来兴起的稀磁性半导体纳米晶体(DMSNC)是一种新型的半导体材料,由于其优异的光电磁性能得到了国内外研究人员的重视,并取得了快速发展,有望在多个领域得到应用。本文对以胶体法制备的Mn2 掺杂的ZnS、ZnSe、CdS、CdSe等为代表的Ⅱ-Ⅵ族DMSNC的主要研究进展和掺杂原理进行了综述,指出了现阶段所存在的问题,并对其未来发展进行了展望。     

钙钛矿材料组分调控策略及其光电器件性能研究进展

近年来，钙钛矿太阳电池的光电转换效率取得了爆发式增长，这与电池中钙钛矿薄膜的制备工艺和材料组分密切相关.关于钙钛矿薄膜的制备方法，相关的研究报道及综述较多，然而钙钛矿材料组分调控方面的研究梳理工作相对缺乏.本综述总结了近年来不同组分体系钙钛矿材料的研究进展，包括有机无机铅卤钙钛矿、全无机铅卤钙钛矿、少铅钙钛矿以及无铅钙钛矿.重点介绍了不同体系中具有代表性的材料组分及其对器件性能的影响，旨在梳理通过组分调控提高钙钛矿电池的效率及稳定性的研究思路，最终实现商业化应用.     

Synthesis of chiral γ-lactones via a RuPHOX-Ru catalyzed asymmetric hydrogenation of aroylacrylic acids

An asymmetric hydrogenation of aroylacrylic acids catalyzed by RuPHOX-Ru catalyst has been developed, affording the corresponding chiral γ-lactones in high yields and with up to 93% ee. The methodology has the advantage of utilizing easily accessible substrates and has therefore expand the scope of the resulting chiral γ-lactones. Furthermore, high catalytic efficiency was achieved in that the reduction of both the CC and CO double bonds was achieved in one step. The current work provides an alternative and convenient pathway for the synthesis of a wide range of chiral γ-lactones.     

二氧化钛纤维表面担载Pt纳米结构的原子力显微镜研究

通过原子力显微镜研究了二氧化钛纤维表面担载Pt的表面形貌及其结构.结果表明,TiO2纤维表面担载的Pt具有微米尺度的近似六边形或者近似长方形的结构,与在单晶TiO2(110)表面的Pt纳米簇形貌相似,但尺度较大.TiO2纤维担载的Pt表面明显存在不同高度的台阶结构,台阶高度以2~4倍Pt(111)晶面面间距的高度为主.由Pt在TiO2纤维表面的形貌与纤维的纳米晶粒排布有序性推测可知,Pt与TiO2纤维存在强的相互作用,可能正是这种强相互作用和表面台阶结构才使TiO2表面担载的Pt虽是微米尺寸但仍具有高光催化活性.     

碳纤维中的单层石墨物相及其对力学性能的影响

依据碳纤维中各种物相的X射线衍射特性, 确认PAN基碳纤维中除了乱层石墨微晶外, 还存在大量的单层六元环C原子层面物相, 建立起两种非完整结晶物相的定量分析方法. 实验结果表明, 随着退火温度由1350 ℃上升到2400 ℃, Tx-3高强型碳纤维中的单层石墨含量由59.6%下降到34.8%, 乱层石墨含量由40.4%上升为65.2%. 与此同时, 碳纤维的拉伸强度则由3.65 GPa下降到2.05 GPa, 而延伸率也由1.04%下降到0.58%. 并对PAN基碳纤维中单层石墨对其力学性能的影响也进行了初步的探讨.     

反式共轭类碳烯CH_2CH—CHC∶LiF的构型及异构化反应

用MP2 / 6 - 31G 解析梯度方法研究了反式共轭类碳烯CH2CH—CHC∶LiF的结构 .得到 3个平衡构型和 2个异构化反应的过渡态 .计算结果表明 ,反式共轭类碳烯有两种比较稳定的平衡构型 .分析了各平衡构型的结构特点及稳定性 ,给出了各种平衡构型及过渡态结构的Mulliken集居数 ,并讨论了两种稳定构型的化学活性